| Technical Parameter | ||
| Model | W295W-10A | |
| Engine Model | YCF3085-T480 | |
| Engine Power | 62.5KW/2200rpm | |
| Maximum torque(N.M)/Rotational speed (r/min) | 340NM/1600rpm | |
| Main pump form | Axial piston pump | |
| Maximum flow rate of the main pump | 154L/min | |
| Fuel tank capacity | 175 | |
| Hydraulic oil tank capacity | 120 | |
| Travel speed | 33 | |
| Swing speed | 12 | |
| Climbing ability | 35° | |
| Bucket capacity | 0.23 | |
| Working Range | ||
| Specifications | 3700+2200 | 3900+2200 |
| Maximum digging height | 7480mm | 7710mm |
| Maximum unloading height | 5490mm | 5800mm |
| Maximum digging depth | 4180mm | 4440mm |
| Maximum vertical arm digging depth | 3740mm | 3910mm |
| Maximum digging distance | 7150mm | 7460mm |
| Minimum radius of turn | 2220mm | 2790mm |
| Maximum height at minimum turning radius | 5490mm | 5710mm |
| Maximum surface excavation area | 6960mm | 7280mm |
| Dimension | ||
| Length | 6480mm | 6710mm |
| Width | 2220mm | 2220mm |
| Height (during transportation) | 2890mm | 2890mm |
| Height (top of cab) | 2890mm | 2890mm |
| Wheel pitch | 1670mm | 1670mm |
| Wheel base | 2500mm | 2500mm |
| Minimum ground clearance | 280mm | 280mm |
| Radius of tail rotation | 1940mm | 1940mm |